Equipment / configured to order
SZ-MQJ-1T Electrode Die Cutting Machine 1T
A 1-tonne booster-cylinder die cutter for pouch cell electrodes. Sheet material is fed by hand against an infrared locating line and the die is driven through the electrode in a single stroke, leaving a clean edge without burrs, dust or press…
Typical applications
Discuss your intended cell design and application with our team.
Customization scope
The equipment configuration is defined around your project requirements.
Overview
A 1-tonne booster-cylinder die cutter for pouch cell electrodes. Sheet material is fed by hand against an infrared locating line and the die is driven through the electrode in a single stroke, leaving a clean edge without burrs, dust or press marks. The machine serves both laboratory sample preparation and small-volume production.
Key features
- Output of 800–2000 pieces per hour, depending on electrode size and feed rate
- Manual feeding with infrared positioning
- Clean cut without burrs, dust or press marks
- Quick die change; the die is a consumable with a life of approximately 30,000 strokes
- One to four pieces per stroke depending on die layout, one piece as standard
- Compact and enclosed bench-top format
Technical specifications
| Power supply | 220 V / 50 Hz |
|---|---|
| Power | 10 W |
| Compressed air | 0.5–0.8 MPa |
| Maximum punching size | 280 × 180 mm; larger sizes on request |
| Positioning | Infrared locating device |
| Standard cathode die | 58 × 73 mm |
| Standard anode die | 60 × 75 mm |
| Booster cylinder | 1 T |
| Stretching cylinder | 0.15 T |
| Feeding mode | Manual |
| Punching accuracy | ±0.1 mm |
| Output | 800–2000 EA/h for small electrodes; lower for sheet material |
| Die life | Approx. 30,000 strokes (consumable) Specifications subject to change without prior notice. |
Information for project review
Please share your cell format, chemistry, target capacity, process scope, facility conditions and voltage standard.
Training in China
Training at our China facility is available for this product. Scope, schedule and language are agreed for each project.
LET’S DEFINE YOUR PROJECT
Your line starts with a conversation.
Share what you want to make, where you are in the process, and what your team needs to learn.
support@szotech.comSpecifications vary by project configuration. Contact us for a tailored proposal.